Z dôvodu zmeny výšky DPH sme dočasne pozastavili možnosť nákupu tovaru s platbou na dobierku. Ďakujeme za porozumenie.
Viac
    Registrácia
    Domov / Ostatné / Ukončená výroba / Fluke PM6306 - RCL Meter

    Fluke PM6306 - RCL Meter

    Značka: Fluke
    PM 6306 RCL Meters
    Versatile component measurement and testing

    The PM 6306 is the most versatile RCL meter, allowing testing at any frequency up to 1 MHz. AC and DC test voltages are continuously adjustable, and the PM 6306 has a built-in contact check function to ensure optimum connection. With these capabilities, you can handle a wide variety of components under realistic test conditions.

    Dostupnosť Na objednávku
    Môžeme doručiť do:
    20.1.2025
    Možnosti doručenia
    Kód: 1960
    €1 €0,83 bez DPH
    Fluke PM6306 - RCL Meter
    Značka: Fluke
    Fluke PM6306 - RCL Meter
    Ukončená výroba
    Doprava zadarmo pre každý nákup nad 80€ s DPH vytvorený cez náš eshop s doručením na Slovensko.
    Doprava zadarmo
    pre každý nákup nad 80€ s DPH vytvorený cez náš eshop s doručením na Slovensko.
    Široké možnosti platby na dobierku, kartou online alebo bankovým prevodom.
    Široké možnosti
    platby a doručenia pre vaše pohodlie. Prijímame platobné karty, Google Pay alebo Apple Pay.
    Tovar skladom odosielame v deň objednávky (do 13:00)
    Tovar skladom
    odosielame v deň objednávky kuriérom SPS alebo službou Packeta (objednávky do 13:00).
    Záručný, pozáručný servis teplomerov, multimetrov a iného metrologického vybavenia.
    Servis a kalibrácia
    teplomerov, multimetrov a iného metrologického vybavenia vrátane záručného a pozáručného servisu.

    PM 6306 Programmable RCL meter (DC-1 MHz)

    AC Test Mode
    Test frequency
    PM 6306: 50, 60, 100, 120 Hz
      200 Hz to 100 kHz (100 Hz steps)
      100 kHz to 1 MHz (1 kHz steps)
    PM 6304: 50, 60, 100, 120 Hz
      200 Hz to 20 kHz (100 Hz steps)
      100 kHz
    Test frequency accuracy
    PM 6306: 0.01%
    PM 6304: 0.01%
    Test signal levels
    PM 6306: 50 mV to 2V (10 mV steps) via 100Ω
    PM 6304: 50 mV via 100Ω
      1V via 100Ω
      2V via 400Ω
    Basic measurement accuracy at normal measurement mode
    PM 6306: 0.1% ± 1 digit (for ³ 0.25V, £ 50 kHz)
      0.1% * (f/50 kHz) ± 1 digit (for ³ 0.25V, > 50 kHz)
      0.1% * (0.25V/Vt) ± 1 digit (for < 0.25V, £ 50 kHz)
    PM 6304: 0.05% ± 1 digit (for PM 6304C, £ 2 kHz)
      0.1% ± 1 digit (for £ 20 kHz)
      0.4% ± 1 digit (100 kHz)
      0.5% ± 1 digit (for 50 mV £ 20 kHz)
      2.0% ± 1 digit (for 50 mV, 100 kHz)
    DC bias
    Internal
    PM 6306: 0 to 10V (0.1V steps)
    PM 6304: 2V
    External
    PM 6306: 0 to 40V
    PM 6304: 0 to 40V
    DC test mode (Optional)
    Test signal levels
    PM 6306: 50 mV to 2V (10 mV steps) via 100Ω
    PM 6304: 300 mV via 100Ω
      1V via 100Ω
      2V via 400Ω
    Basic measurement accuracy
    PM 6306: 0.1% ± 1 digit (for ³ 0.25V)
    PM 6304: 0.1% ± 1 digit (for 1V)
    Contact check (PM 6306 only)
    Pass
      3 3Ω
    Fail
      3Ω (with indication of failed connection lead)
    Maximum measuring ranges
    Impedance/Resistance AC Z or RAC
      0.0000Ω to 200 MΩ
    Resistance DC R DC
      0.0000Ω to 50 MΩ
    Capacitance C
      0.00 pF to 31.8F
    Inductance L
      0.00 mH to 637 kH
    Quality factor Q
      0.000 to 1000
    Dissipation factor D
      0.000 to 1000
    Phase Angle F
      -179 to + 180 deg
    Voltage monitor VX
      0.1 mV to 2.00V
    Current monitor IX
      0.005 mA to 10.0 mA
    Maximum resolution
    Impedance/Resistance AC Z or RAC
      0.1 mΩ
    Resistance DC R DC
      0.1 mΩ
    Capacitance C
      0.01 pF
    Inductance L
      0.01 mH
    Quality factor Q
      0.001
    Dissipation factor D
      0.001
    Phase Angle F
      0.1 deg
    Voltage monitor VX
      0.1 mV
    Current monitor IX
      0.001 mA
    Circuit diagram
    Display
      1 of 7 different equivalent circuit diagrams
    Auto Mode
    Read-out
      Dominant and secondary parameter
    Equivalent circuit diagram
      Parallel for R+C, Serial for R+L
    Manual mode
    Read-out
      Dominant and secondary parameter or Z, F, D, Q, VX, IX
    Equivalent circuit diagram
      Parallel or serial selectable
    Average function
    Function
      Exponential averaging in continuous mode
    Levels
    PM 6306: 3 (and off)
    PM 6304: 1 (and off)
    Deviation mode (PM 6306 only)
    Relative range in respect to reference value
      -100% to +100%
    Measuring modes (Normal)
    Continuous
      2 measurements/s
    Single
      Triggered via "TRIG" key
      Triggered via handler interface
      Triggered via IEEE-488 or RS-232
    Test frequency
    PM 6306: 50, 60, 100, 120 Hz
      200 Hz to 100 kHz (100 Hz steps)
      100 kHz to 1 MHz (1 kHz steps)
      DC (optional)
    PM 6304: 50, 60, 100, 120 Hz
      200 Hz to 20 kHz (100 Hz steps)
      100 kHz
      DC (optional)
    Read-out
      Display or via IEEE-488 or RS-232 interface
    Measuring Modes (Fast)
    Max. speed
      10 measurements/s
    Test frequency
    PM 6306: 200 Hz to 100 kHz (200 Hz steps)
      100 kHz to 1 MHz (1 kHz steps)
      DC (optional)
    PM 6304: 200 Hz to 20 kHz (200 Hz steps) 100 kHz
      DC (optional)
    Single
      Triggered via handler interface
      Triggered via IEEE-488 or RS-232
    Read-out
      Via IEEE or RS-232 interface (display blanked)
    Binning
    Standard bins
      9
    Special bins
      Bin "0" and bin "fail"
    Bin programming via
      IEEE-488 interface
      RS-232 interface
      Bin programmer (PM 6304 only)
    Bin limit programming
      Absolute or relative
    Trim function
    Open circuit
      Open circuit compensation Z > 100 kW
    Short circuit
      Short circuit compensation Z < 10W
    Protection against charged capacitors
    C < 2 mF
    PM 6306: Vmax < 200V
    PM 6304: Vmax < 500V
    2 mF o C o 2 mF
    PM 6306: Vmax <47 x (C/mF) -0.234
      (Vmax in V, C in mF)
    PM 6304: Vmax <117 x (C/mF) -0.234
      (Vmax in V, C in mF)
    Stored settings (non-volatile memory)
    Front panel settings
      9 + 1 (trim figures included)
    Bin settings
      9 + 1
    Print measurements results
    Print measurements results
      Via RS-232 interface for serial printers
    Calibration interval
    Calibration interval
      1 year
    Environmental Conditions
    Operating Temperature
      0° to 50° C
    Storage Temperature
      -40° C to 70° C
    Power, battery life
      100/120/220/240V + 10%
    Line frequency
      50/60 Hz
    Power Consumption
    PM 6306: 44 VA
    PM 6304: 31 VA
    Safety
      According to CE-regulation 73/23 EN61010-1 CAT II, Pollution Degree 2
    EMC
      According to CE regulation 89/336: Emission according to EN 55011, Group 1 Class B, respectively CISPR 11. Immunity according to EN 50082-1, inclusive IEC 801-2, -3, -4
    Warm up Time
    PM 6306: 30 minutes
    PM 6304: 5 minutes
    Dimensions and weight
    W x H x D
      315 x 105 x 405 mm (12.4 in x 4.13 in x 15.9 in)
    Weight
    PM 6306: 5.3 kg (11.7 lb)
    PM 6304: 4.7 kg (10.4 lb)

    Buďte prvý, kto napíše príspevok k tejto položke.

    Nevypĺňajte toto pole: